Appliance Lead 20 Amp 4 Pin Round Three Phase Plug with Bootlace Pins/or Lugs

Quality appliance lead, expertly assembled and tested by licensed electricians in Australia. Featuring a 4 Pin, 20 Amp, round three phase straight plug with bootlace pins or Lugs.

Key Features:

• High-quality appliance lead, assembled and tested by licensed electricians in Australia.
• Warranty: 24 months (excludes misuse).
• Installation Requirement: Must be installed and tagged by a legally qualified professional.
• Purpose: This is not an extension lead. It is designed for permanent connection to an appliance, such as replacing an existing lead.
• Quality Assurance: All Resource Electrical Appliance Leads are assembled and tested in-house by our licensed electricians.

Lead Time:

• Standard: Dispatched within 1 business day. We will notify you if delays occur.

Configuration Options:

• Plug Type: Industrial Australian Electrical Straight Extension Plug
• Lead Length: Available from 1 metre to 20 metres.
• Wire Ends:
• Standard termination with Bootlace Pins.
• Some leads offer Tinned Copper Tube Crimp Lugs with various stud hole sizes (availability depends on the product).
• Heat shrink is applied for wire and lug protection.

IMPORTANT:

To avoid extra costs from ordering the wrong product, confirm plug and lead compatibility before purchasing (e.g., 5 Pin 32A, 5 Pin 20A, 5 Pin 10A). If unsure, contact us—we’re happy to assist!

Switch Gear Specifications:

• Powerwave Industrial Switch Gear and power board module bases are Series 56 style, IP66-rated, sourced from high-quality Australian brands.
• Plastics: PCA18 virgin grade (no regrind).
• Hardware: 304 Stainless Steel Springs & Mounting Screws.
• Brass Components: >85% copper content.
• Compliance: All Powerwave products hold Australian/NZ Approval Certificates.
• Interchangeability: Fully compatible with other major brands.

Cable Specifications:

• 4 Core Cable:
• CSA: 2.5mm²
• NST: 1.9mm
• Max DC Resistance (@20°C): 8.21 ohms/km
• Nominal Diameter: 12.8mm
• Amperage Rating: 27A (per AS/NZS 3008.1.1.2009 Table 14)
• Weight: 270kg/km
• Cable Type: Multi-core rubber-insulated and sheathed flexible power cable with Ethylene-Propylene Rubber (EPR) R-EP-90 90°C conductor.
• Conductor Standard: Class 5 tinned copper (AS/NZS 1125, IEC 60228).
• Durability:
• Submersible rating: 200m (suitable for freshwater, saltwater, and contaminated water).
• UV, oil, and weather-resistant.
• Flame retardant (IEC 0332-1-2:2004, EN60332-1-2-2004).
• Outer Jacket: Chlorinated Polyethylene (CPE rubber compound, black).
• Rated Voltage: 0.6/1kV.

Appliance Lead Specifications

Warranty & Compliance

• Warranty: 24 months (excludes misuse)
• Assembly & Testing: Assembled and tested in-house by licensed electricians
• Installation & Tagging: Must be performed by a legally qualified professional
• Type: Not an extension lead – designed for permanent appliance connection

General Specifications

• Plug Type: 4 Pin, 20 Amp, Round
• Phase: Three Phase

Configuration Options

• Plug Options:
• Standard: Industrial Australian Electrical Extension Plug
• Lead Lengths (m): 1 – 20
• Wire End Options:
• Bootlace Pins: Terminate all wires
• Lugs & Crimps:
• Tinned Copper Tube Crimp Lugs (hole/stud size varies)
• Heat shrink protection applied